Custom Options for SunQuest EX100 Vinyl

Below are the custom options available for the SunQuest EX100 Vinyl. Use the pulldown menu to the right to navigate to an option category.

Brackets

Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Frame

Top of Page

Casing Frame

Used for outside mounts only; installed on the wall or directly on top of an existing trim. Trim must be at least 2 5/8" wide. When installing on top of an existing trim, you may order C-Frame inside cover to cover the gap between C-Fram and trim.


Casing Frame

Used for outside mounts only; installed on the wall or directly on top of an existing trim. Trim must be at least 2 5/8" wide. When installing on top of an existing trim, you may order C-Frame inside cover to cover the gap between C-Fram and trim.


Casing Frame

Used for outside mounts only; installed on the wall or directly on top of an existing trim. Trim must be at least 2 5/8" wide. When installing on top of an existing trim, you may order C-Frame inside cover to cover the gap between C-Fram and trim.


L-Frame

May be used for inside mounts if windows are square. Some caulking may be required, or a cover strip may me used to cover any gaps. The L-Frame can also be used for outside mounts directly on top of trim, and beside trim. Optional L-Frame cover strip my be ordered, and can be glued to L-frame to cover gap between L-Frame and window opening.


L-Frame

May be used for inside mounts if windows are square. Some caulking may be required, or a cover strip may me used to cover any gaps. The L-Frame can also be used for outside mounts directly on top of trim, and beside trim. Optional L-Frame cover strip my be ordered, and can be glued to L-frame to cover gap between L-Frame and window opening.


Mounting Strip

Used in conjunction with adjustable bent leaf hinges for inside mounts without frames, or as a light block mounted on the inside of panels which are installed without frames. It is not visible from inside the room.


Mounting Strip

Used in conjunction with adjustable bent leaf hinges for inside mounts without frames, or as a light block mounted on the inside of panels which are installed without frames. It is not visible from inside the room.


T-Post

Used as a vertical divider to hinge single or bifold panels when openings are too wide to hinge panels from the sides. Usually placed directly in front of any existing window dividers. Ideally it's easily connected to the frames, but can also be connected to existing opening with L-brackets.


T-Post

Used as a vertical divider to hinge single or bifold panels when openings are too wide to hinge panels from the sides. Usually placed directly in front of any existing window dividers. Ideally it's easily connected to the frames, but can also be connected to existing opening with L-brackets.


Trim Frame

Used for inside mounts, in openings with drywall returns that do not have a trim around them. May be ordered with sill frame at bottom for openings with a window sill.


Trim Frame

Used for inside mounts, in openings with drywall returns that do not have a trim around them. May be ordered with sill frame at bottom for openings with a window sill.


Z-Frame

Used for inside mount applications only. Blends well with all types of trim. Excellent for slightly out of square windows because trim design covers any inperfections in the window. Jamb depth required is a minimal 1 1/4". May be ordered with sill frame at bottom for openings will a window sill.


Z-Frame

Used for inside mount applications only. Blends well with all types of trim. Excellent for slightly out of square windows because trim design covers any inperfections in the window. Jamb depth required is a minimal 1 1/4". May be ordered with sill frame at bottom for openings will a window sill.


Installation

Top of Page

Installation Type

Inside or Outside Mount refers to whether the product will be mounted within the window frame (inside mount) or on the wall, window trim or molding surrounding the window (outside mount).

On inside mounts, deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.

On outside mounts you will want to overlap or extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Installation Type

Inside or Outside Mount refers to whether the product will be mounted within the window frame (inside mount) or on the wall, window trim or molding surrounding the window (outside mount).

On inside mounts, deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.

On outside mounts you will want to overlap or extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Panel

Top of Page

ClearView


ClearView


Divider Rail for 2 1/2" louvers

Used to divide the top louvers from bottom louvers within the same panel. Divider rails are strongly recommended for shutters over 50" in length, and is mandatory for shutters over 60" in length. Shutters over 96" in length must have two divider rails


Divider Rail for 2 1/2" louvers

Used to divide the top louvers from bottom louvers within the same panel. Divider rails are strongly recommended for shutters over 50" in length, and is mandatory for shutters over 60" in length. Shutters over 96" in length must have two divider rails


Divider Rail for 3 1/2" louvers

Used to divide the top louvers from bottom louvers within the same panel. Divider rails are strongly recommended for shutters over 50" in length, and is mandatory for shutters over 60" in length. Shutters over 96" in length must have two divider rails


Divider Rail for 3 1/2" louvers

Used to divide the top louvers from bottom louvers within the same panel. Divider rails are strongly recommended for shutters over 50" in length, and is mandatory for shutters over 60" in length. Shutters over 96" in length must have two divider rails


Hinge

Factory installed 2-part hinge makes panels easy to install. Available in white, brass and stainless steel the 2-part hinge allows panels to be removed easily for cleaning and total access to the window.


Hinge

Factory installed 2-part hinge makes panels easy to install. Available in white, brass and stainless steel the 2-part hinge allows panels to be removed easily for cleaning and total access to the window.


Knobs

White knobs are available as an upcharge


Knobs

White knobs are available as an upcharge


Magnetic Catches

All magnetic catches should be mounted on frames. When there is no frame mount magnets on window sill or jamb.


Magnetic Catches

All magnetic catches should be mounted on frames. When there is no frame mount magnets on window sill or jamb.


Tilt Bar

Provides the time honored look associated with shutters. The tilt bar allows louvers to be locked in an open position or can be closed in both directions unlike other shutters which close in only one direction. This method also eliminates unsightly staples or gears which tend to rust.


Tilt Bar

Provides the time honored look associated with shutters. The tilt bar allows louvers to be locked in an open position or can be closed in both directions unlike other shutters which close in only one direction. This method also eliminates unsightly staples or gears which tend to rust.


Slat Size

Top of Page

Shutter Louver Size

Windows aren't one-size-fits all, so we offer both a 2-1/2" and 3"-1/2" slat or louver size on our SunQuest Vinyl Shutters. The larger the louvers size the more light and view you have through your window.


Shutter Louver Size

Windows aren't one-size-fits all, so we offer both a 2-1/2" and 3"-1/2" slat or louver size on our SunQuest Vinyl Shutters. The larger the louvers size the more light and view you have through your window.


Return to Product Detail


Home | About Skandia | Where to Buy | Dealer Info | FAQs | Warranty | Careers | Contact Us
Our Products >> Horizontal Blinds | Vertical Blinds | Shades | Shutters | Motorization | Arches and Cornices | Drapery Hardware
© 2016 Skandia Window Fashions. All rights reserved. Review our terms of use and our privacy policy.