Custom Options for Melhanna Roller Shades

Below are the custom options available for the Melhanna Roller Shades. Use the pulldown menu to the right to navigate to an option category.

Brackets

Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Headrail

Top of Page

Reverse roll

An option on Roller shades where the fabric rolls off of the front of the shade instead of the back.


Reverse roll

An option on Roller shades where the fabric rolls off of the front of the shade instead of the back.


Standard Cassette Roller System

The Standard Cassette Roller System is perfectly designed to blend with today's decorating themes. The valance enhances today's architecture with its sleek euro style. Available as a solid fascia or a fabric insert option. Cassette colors for solid fascia are white, black and silver. Cassette colors for fabric insert option are white and black. The cassette only allows roll type as standard only. No reverse roll available. Minimum width: 24". Maximum width: 98".


Standard Cassette Roller System

The Standard Cassette Roller System is perfectly designed to blend with today's decorating themes. The valance enhances today's architecture with its sleek euro style. Available as a solid fascia or a fabric insert option. Cassette colors for solid fascia are white, black and silver. Cassette colors for fabric insert option are white and black. The cassette only allows roll type as standard only. No reverse roll available. Minimum width: 24". Maximum width: 98".


Standard roll

An option on Roller shades where the fabric rolls off of the back of the shade instead of the front.


Standard roll

An option on Roller shades where the fabric rolls off of the back of the shade instead of the front.


Standard Roller System

This is the finest roller shade system on the market. Clutch and Pin End use the same bracket. This design allows bracket sharing which reduces light gaps on multiple shades. The spring loaded end plug with telescoping pin makes installation easier by allowing a full 1/4" variation in measurements. The bracket covers give your shade a more finished look. Our 1 1/4", 1 5/8" and 1 3/4" aluminum roller tubes are strong enough to handle an 8 foot wide by 10 foot long shade without the slightest hint of bow or slippage. Round, fabric covered bottomrail or flat fabric-wrapped bottomrail provides total color coordination.


Standard Roller System

This is the finest roller shade system on the market. Clutch and Pin End use the same bracket. This design allows bracket sharing which reduces light gaps on multiple shades. The spring loaded end plug with telescoping pin makes installation easier by allowing a full 1/4" variation in measurements. The bracket covers give your shade a more finished look. Our 1 1/4", 1 5/8" and 1 3/4" aluminum roller tubes are strong enough to handle an 8 foot wide by 10 foot long shade without the slightest hint of bow or slippage. Round, fabric covered bottomrail or flat fabric-wrapped bottomrail provides total color coordination.


Standard Roller System

This is the finest roller shade system on the market. Clutch and Pin End use the same bracket. This design allows bracket sharing which reduces light gaps on multiple shades. The spring loaded end plug with telescoping pin makes installation easier by allowing a full 1/4" variation in measurements. The bracket covers give your shade a more finished look. Our 1 1/4", 1 5/8" and 1 3/4" aluminum roller tubes are strong enough to handle an 8 foot wide by 10 foot long shade without the slightest hint of bow or slippage. Round, fabric covered bottomrail or flat fabric-wrapped bottomrail provides total color coordination.


Installation

Top of Page

Installation Type

Inside or Outside Mount refers to whether the product will be mounted within the window frame (inside mount) or on the wall, window trim or molding surrounding the window (outside mount).

On inside mounts, deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.

On outside mounts you will want to overlap or extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Installation Type

Inside or Outside Mount refers to whether the product will be mounted within the window frame (inside mount) or on the wall, window trim or molding surrounding the window (outside mount).

On inside mounts, deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.

On outside mounts you will want to overlap or extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Roll Type

Top of Page

Reverse Roll

An option on Roller shades where the fabric rolls off of the front of the shade instead of the back.


Standard Roll

An option on Roller shades where the fabric rolls off of the back of the shade instead of the front.


Valance

Top of Page

4" Fabric Insertable Valances

A 4" fabric insertable valance is available for the Standard Roller System and the Deluxe Roller System.


Soft Valance

The 6" soft valance is from the same fabric as the shade and is inserted to maintain it's shape and corners, if applicable.


Return to Product Detail


Home | About Skandia | Where to Buy | Dealer Info | FAQs | Warranty | Careers | Contact Us
Our Products >> Horizontal Blinds | Vertical Blinds | Shades | Shutters | Motorization | Arches and Cornices | Drapery Hardware
© 2016 Skandia Window Fashions. All rights reserved. Review our terms of use and our privacy policy.