Custom Options for Melhanna Roman Shades

Below are the custom options available for the Melhanna Roman Shades. Use the pulldown menu to the right to navigate to an option category.

Brackets

Hold-Down

Hold-down brackets are mounted at the bottom of a blind or shade to hold it in place. Typically used on doors or in windy locations to prevent the window coverings from flapping in the wind or during the opening or closing of the door.


Hold-Down

Hold-down brackets are mounted at the bottom of a blind or shade to hold it in place. Typically used on doors or in windy locations to prevent the window coverings from flapping in the wind or during the opening or closing of the door.


Hold-Down

Hold-down brackets are mounted at the bottom of a blind or shade to hold it in place. Typically used on doors or in windy locations to prevent the window coverings from flapping in the wind or during the opening or closing of the door.


Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Controls

Top of Page

Lift Cord/Cord Lock

Allows you to raise and lower your blind or shade and the cord lock is the mechanism that holds the window covering at any given position. When choosing whether to place the lift cord on the right or left, consider how often you'll be operating the blind or shade and the placement of furniture in your room.

Blinds less than 2-1/2" wide will have center tilt only and cannot be raised or lowered.


Lift Cord/Cord Lock

Allows you to raise and lower your blind or shade and the cord lock is the mechanism that holds the window covering at any given position. When choosing whether to place the lift cord on the right or left, consider how often you'll be operating the blind or shade and the placement of furniture in your room.

Blinds less than 2-1/2" wide will have center tilt only and cannot be raised or lowered.


Lift Cord/Cord Lock

Allows you to raise and lower your blind or shade and the cord lock is the mechanism that holds the window covering at any given position. When choosing whether to place the lift cord on the right or left, consider how often you'll be operating the blind or shade and the placement of furniture in your room.

Blinds less than 2-1/2" wide will have center tilt only and cannot be raised or lowered.


Headrail

Top of Page

2-on-1

An upgrade that allows two separate blinds, shades or woven woods to operate independently from one headrail with its own controls. Normally the controls on the left shade are positioned on the left side and the controls for the right shade are on the right side. This option is available on Cellular shades, Woven Woods, Wood, Faux and Metal blinds. The maximum width for Woven Woods is 96" and 2-on-1 head rails are not available with the Cord Free Option.


2-on-1

An upgrade that allows two separate blinds, shades or woven woods to operate independently from one headrail with its own controls. Normally the controls on the left shade are positioned on the left side and the controls for the right shade are on the right side. This option is available on Cellular shades, Woven Woods, Wood, Faux and Metal blinds. The maximum width for Woven Woods is 96" and 2-on-1 head rails are not available with the Cord Free Option.


3-on-1

An upgrade that allows three separate blinds, shades or woven woods to operate independently from one headrail. This option is available on Woven Woods, Woods, Faux and Metal blinds. Maximum width for Woven Woods is 96".


3-on-1

An upgrade that allows three separate blinds, shades or woven woods to operate independently from one headrail. This option is available on Woven Woods, Woods, Faux and Metal blinds. Maximum width for Woven Woods is 96".


Installation

Top of Page

Inside Mount

Inside Mounts are mounted within the window frame. On inside mounts deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.


Installation Type

Inside or Outside Mount refers to whether the product will be mounted within the window frame (inside mount) or on the wall, window trim or molding surrounding the window (outside mount).

On inside mounts, deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.

On outside mounts you will want to overlap or extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Installation Type

Inside or Outside Mount refers to whether the product will be mounted within the window frame (inside mount) or on the wall, window trim or molding surrounding the window (outside mount).

On inside mounts, deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.

On outside mounts you will want to overlap or extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Outside Mount

Outside Mounts are mounted on the wall, window trim or molding surrounding the window. On outside mounts you will want to extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Material

Top of Page

Flat Roman

Fabric shade that folds neatly to the top of the window opening when raised; lies flat with no folds when the shade is lowered for a tailored look.


Flat Roman

Fabric shade that folds neatly to the top of the window opening when raised; lies flat with no folds when the shade is lowered for a tailored look.


Flat Roman

Fabric shade that folds neatly to the top of the window opening when raised; lies flat with no folds when the shade is lowered for a tailored look.


Standard Roman Shade

Our Melhanna Roman Shades are mounted underneath a premier headrail lift system. The unique construction method incorporates a no-sew bar system that runs down the back of the shade providing a clean, uncluttered appearance while maintaining maximum privacy and light control. By design the fabric flows over the face of the headrail eliminating the need for a separate valance and enhancing the uniform appearance of the shade. The continuous cord loop lift system allows for easier raising or lowering of heavy shades and maintains a constant cord length. The powerful clutch stops the shade precisely at any height making it perfect for large spans of windows where uniform shade length is desired. Hidden snap in installation brackets are zinc plated steel making installation and removal easy.


Standard Roman Shade

Our Melhanna Roman Shades are mounted underneath a premier headrail lift system. The unique construction method incorporates a no-sew bar system that runs down the back of the shade providing a clean, uncluttered appearance while maintaining maximum privacy and light control. By design the fabric flows over the face of the headrail eliminating the need for a separate valance and enhancing the uniform appearance of the shade. The continuous cord loop lift system allows for easier raising or lowering of heavy shades and maintains a constant cord length. The powerful clutch stops the shade precisely at any height making it perfect for large spans of windows where uniform shade length is desired. Hidden snap in installation brackets are zinc plated steel making installation and removal easy.


Standard Roman Shade

Our Melhanna Roman Shades are mounted underneath a premier headrail lift system. The unique construction method incorporates a no-sew bar system that runs down the back of the shade providing a clean, uncluttered appearance while maintaining maximum privacy and light control. By design the fabric flows over the face of the headrail eliminating the need for a separate valance and enhancing the uniform appearance of the shade. The continuous cord loop lift system allows for easier raising or lowering of heavy shades and maintains a constant cord length. The powerful clutch stops the shade precisely at any height making it perfect for large spans of windows where uniform shade length is desired. Hidden snap in installation brackets are zinc plated steel making installation and removal easy.


Teardrop Roman

Fabric shade that pulls neatly to the top of the window opening when raised; features soft cascading folds of fabric when the shade is lowered for the look of a traditional roman shade.


Teardrop Roman

Fabric shade that pulls neatly to the top of the window opening when raised; features soft cascading folds of fabric when the shade is lowered for the look of a traditional roman shade.


Teardrop Roman

Fabric shade that pulls neatly to the top of the window opening when raised; features soft cascading folds of fabric when the shade is lowered for the look of a traditional roman shade.


Return to Product Detail


Home | About Skandia | Where to Buy | Dealer Info | FAQs | Warranty | Careers | Contact Us
Our Products >> Horizontal Blinds | Vertical Blinds | Shades | Shutters | Motorization | Arches and Cornices | Drapery Hardware
© 2016 Skandia Window Fashions. All rights reserved. Review our terms of use and our privacy policy.