Custom Options for ForestView 2"

Below are the custom options available for the ForestView 2". Use the pulldown menu to the right to navigate to an option category.

Brackets

Hold-Down

Hold-down brackets are mounted at the bottom of a blind or shade to hold it in place. Typically used on doors or in windy locations to prevent the window coverings from flapping in the wind or during the opening or closing of the door.


Hold-Down

Hold-down brackets are mounted at the bottom of a blind or shade to hold it in place. Typically used on doors or in windy locations to prevent the window coverings from flapping in the wind or during the opening or closing of the door.


Hold-Down

Hold-down brackets are mounted at the bottom of a blind or shade to hold it in place. Typically used on doors or in windy locations to prevent the window coverings from flapping in the wind or during the opening or closing of the door.


Projection Block

Used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Block

Used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Block

Used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Controls

Top of Page

Cord Tilt

A cord tilt replaces the "wand" tilt with two cords and allows you to change the angle of the slats or louvers, controlling the amount of light that enters the room. Simply pull one cord to open for light and view or pull the other to close the slats for privacy.

When choosing either the left, right side position for your controls, consider how often you'll be operating the blind and the placement of furniture in your room.


Cord Tilt

A cord tilt replaces the "wand" tilt with two cords and allows you to change the angle of the slats or louvers, controlling the amount of light that enters the room. Simply pull one cord to open for light and view or pull the other to close the slats for privacy.

When choosing either the left, right side position for your controls, consider how often you'll be operating the blind and the placement of furniture in your room.


Cord Tilt

A cord tilt replaces the "wand" tilt with two cords and allows you to change the angle of the slats or louvers, controlling the amount of light that enters the room. Simply pull one cord to open for light and view or pull the other to close the slats for privacy.

When choosing either the left, right side position for your controls, consider how often you'll be operating the blind and the placement of furniture in your room.


Lift Cord/Cord Lock

Allows you to raise and lower your blind or shade and the cord lock is the mechanism that holds the window covering at any given position. When choosing whether to place the lift cord on the right or left, consider how often you'll be operating the blind or shade and the placement of furniture in your room.

Blinds less than 2-1/2" wide will have center tilt only and cannot be raised or lowered.


Lift Cord/Cord Lock

Allows you to raise and lower your blind or shade and the cord lock is the mechanism that holds the window covering at any given position. When choosing whether to place the lift cord on the right or left, consider how often you'll be operating the blind or shade and the placement of furniture in your room.

Blinds less than 2-1/2" wide will have center tilt only and cannot be raised or lowered.


Lift Cord/Cord Lock

Allows you to raise and lower your blind or shade and the cord lock is the mechanism that holds the window covering at any given position. When choosing whether to place the lift cord on the right or left, consider how often you'll be operating the blind or shade and the placement of furniture in your room.

Blinds less than 2-1/2" wide will have center tilt only and cannot be raised or lowered.


Wand Tilt

Simply twist the wood or plastic cylinder shaped wand to control the tilt of a blind slat.

The tilt control allows you to change the angle of the slats or louvers and controls the amount of light that enters the room. When choosing either the left, right or same side position for your controls, consider how often you'll be operating the blind and the placement of furniture in your room.

Blinds less than 12-1/2" wide will have center tilt only and cannot be raised or lowered. Wands are used exclusively on 1" horizontals and can be used instead of "cord" tilt on 2" horizontals.


Wand Tilt

Simply twist the wood or plastic cylinder shaped wand to control the tilt of a blind slat.

The tilt control allows you to change the angle of the slats or louvers and controls the amount of light that enters the room. When choosing either the left, right or same side position for your controls, consider how often you'll be operating the blind and the placement of furniture in your room.

Blinds less than 12-1/2" wide will have center tilt only and cannot be raised or lowered. Wands are used exclusively on 1" horizontals and can be used instead of "cord" tilt on 2" horizontals.


Wand Tilt

Simply twist the wood or plastic cylinder shaped wand to control the tilt of a blind slat.

The tilt control allows you to change the angle of the slats or louvers and controls the amount of light that enters the room. When choosing either the left, right or same side position for your controls, consider how often you'll be operating the blind and the placement of furniture in your room.

Blinds less than 12-1/2" wide will have center tilt only and cannot be raised or lowered. Wands are used exclusively on 1" horizontals and can be used instead of "cord" tilt on 2" horizontals.


Finishes

Top of Page

Specialty Wood Finishes

Unique finishes available as an upgrade on 2" wood horizontal blinds. These specialty finishes include, paints, stains, sandblasted and vanity finishes. Our sandblasted finishes feature a weathered look that highlights wood's rugged natural grain while our Vanity finishes show off just how sleek and high gloss wood can be.


Specialty Wood Finishes

Unique finishes available as an upgrade on 2" wood horizontal blinds. These specialty finishes include, paints, stains, sandblasted and vanity finishes. Our sandblasted finishes feature a weathered look that highlights wood's rugged natural grain while our Vanity finishes show off just how sleek and high gloss wood can be.


Specialty Wood Finishes

Unique finishes available as an upgrade on 2" wood horizontal blinds. These specialty finishes include, paints, stains, sandblasted and vanity finishes. Our sandblasted finishes feature a weathered look that highlights wood's rugged natural grain while our Vanity finishes show off just how sleek and high gloss wood can be.


Headrail

Top of Page

2-on-1

An upgrade that allows two separate blinds, shades or woven woods to operate independently from one headrail with its own controls. Normally the controls on the left shade are positioned on the left side and the controls for the right shade are on the right side. This option is available on Cellular shades, Woven Woods, Wood, Faux and Metal blinds. The maximum width for Woven Woods is 96" and 2-on-1 head rails are not available with the Cord Free Option.


2-on-1

An upgrade that allows two separate blinds, shades or woven woods to operate independently from one headrail with its own controls. Normally the controls on the left shade are positioned on the left side and the controls for the right shade are on the right side. This option is available on Cellular shades, Woven Woods, Wood, Faux and Metal blinds. The maximum width for Woven Woods is 96" and 2-on-1 head rails are not available with the Cord Free Option.


3-on-1

An upgrade that allows three separate blinds, shades or woven woods to operate independently from one headrail. This option is available on Woven Woods, Woods, Faux and Metal blinds. Maximum width for Woven Woods is 96".


3-on-1

An upgrade that allows three separate blinds, shades or woven woods to operate independently from one headrail. This option is available on Woven Woods, Woods, Faux and Metal blinds. Maximum width for Woven Woods is 96".


Installation

Top of Page

Inside Mount

Inside Mounts are mounted within the window frame. On inside mounts deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.


Installation Type

Inside or Outside Mount refers to whether the product will be mounted within the window frame (inside mount) or on the wall, window trim or molding surrounding the window (outside mount).

On inside mounts, deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.

On outside mounts you will want to overlap or extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Installation Type

Inside or Outside Mount refers to whether the product will be mounted within the window frame (inside mount) or on the wall, window trim or molding surrounding the window (outside mount).

On inside mounts, deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.

On outside mounts you will want to overlap or extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Outside Mount

Outside Mounts are mounted on the wall, window trim or molding surrounding the window. On outside mounts you will want to extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Ladder

Top of Page

Braided

Standard ladders are thin braided cords that are used in the construction of blinds, the ladder spaces and holds the slats together. In some product styles you may have the option of substituting a cloth twill tape in place of the standard ladder or changing the color of the ladder to create a custom look.


Braided

Standard ladders are thin braided cords that are used in the construction of blinds, the ladder spaces and holds the slats together. In some product styles you may have the option of substituting a cloth twill tape in place of the standard ladder or changing the color of the ladder to create a custom look.


Braided

Standard ladders are thin braided cords that are used in the construction of blinds, the ladder spaces and holds the slats together. In some product styles you may have the option of substituting a cloth twill tape in place of the standard ladder or changing the color of the ladder to create a custom look.


Cloth Tape

Cloth ladder tapes make your blinds more distinctive. You can choose from beautiful colors with a tailored herringbone texture. Whether you opt for a matching color or a vivid contrast, these tapes add bold style.


Cloth Tape

Cloth ladder tapes make your blinds more distinctive. You can choose from beautiful colors with a tailored herringbone texture. Whether you opt for a matching color or a vivid contrast, these tapes add bold style.


Cloth Tape

Cloth ladder tapes make your blinds more distinctive. You can choose from beautiful colors with a tailored herringbone texture. Whether you opt for a matching color or a vivid contrast, these tapes add bold style.


Routeless

Our Visions Privacy feature uses a durable color-coordinated unique braided ladder configuration that positions the cord route holes near the back of the slat so that when the blind is tilted closed it offers greater privacy control. Visions privacy provides a sleek modern look with only minor light leakage. For crowned slats, tilt the convex side of the slat facing the room interior for maximum closure and privacy.


Routeless

Our Visions Privacy feature uses a durable color-coordinated unique braided ladder configuration that positions the cord route holes near the back of the slat so that when the blind is tilted closed it offers greater privacy control. Visions privacy provides a sleek modern look with only minor light leakage. For crowned slats, tilt the convex side of the slat facing the room interior for maximum closure and privacy.


Slat Size

Top of Page

Slats 2"

Windows aren't one-size-fits all, so we offer different slat or louver sizes. In general, small windows and French doors look best with smaller slat sizes. 2" & 2-1/2" slats suit medium and large windows.


Slats 2"

Windows aren't one-size-fits all, so we offer different slat or louver sizes. In general, small windows and French doors look best with smaller slat sizes. 2" & 2-1/2" slats suit medium and large windows.


Slats 2"

Windows aren't one-size-fits all, so we offer different slat or louver sizes. In general, small windows and French doors look best with smaller slat sizes. 2" & 2-1/2" slats suit medium and large windows.


Specialty

Top of Page

Multi Color

An upgrade allowing the use of two or more color of slat material to be used. Creating a stripe or stripes in the blind.


Multi Color

An upgrade allowing the use of two or more color of slat material to be used. Creating a stripe or stripes in the blind.


Valance

Top of Page

ForestView 2" Standard

All our wood blinds come with a standard wood valance in the same finish as the blinds. Decorative Architectural valances are available with 2" and 2 1/2" blinds. All wood valances are made of the same high quality hardwoods used for our wood blinds.


ForestView 2" Standard

All our wood blinds come with a standard wood valance in the same finish as the blinds. Decorative Architectural valances are available with 2" and 2 1/2" blinds. All wood valances are made of the same high quality hardwoods used for our wood blinds.


ForestView 2" Standard

All our wood blinds come with a standard wood valance in the same finish as the blinds. Decorative Architectural valances are available with 2" and 2 1/2" blinds. All wood valances are made of the same high quality hardwoods used for our wood blinds.


ForestView 3"

All our wood blinds come with a standard wood valance in the same finish as the blinds. Decorative Architectural valances are available with 2" and 2 1/2" blinds. All wood valances are made of the same high quality hardwoods used for our wood blinds.


ForestView 3"

All our wood blinds come with a standard wood valance in the same finish as the blinds. Decorative Architectural valances are available with 2" and 2 1/2" blinds. All wood valances are made of the same high quality hardwoods used for our wood blinds.


Orlando

Available on horizontal wood and faux wood blinds.


Return to Product Detail


Home | About Skandia | Where to Buy | Dealer Info | FAQs | Warranty | Careers | Contact Us
Our Products >> Horizontal Blinds | Vertical Blinds | Shades | Shutters | Motorization | Arches and Cornices | Drapery Hardware
© 2016 Skandia Window Fashions. All rights reserved. Review our terms of use and our privacy policy.