Custom Options for SaVanna S-95 Headrail

Below are the custom options available for the SaVanna S-95 Headrail. Use the pulldown menu to the right to navigate to an option category.

Brackets

Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Projection Bracket

Used to avoid obstructions such as moldings around a window or handles on outside mount installations. Metal L-shaped projection bracket are used to mount product to wall, window trim or molding. Sometimes referred to as "angle irons". Extension blocks may be used to add an extra 3/8" to 1/2" of projection to the head rail. Spacer blocks are usually used to avoid slight obstructions such as molding around a window on outside mount installations.


Controls

Top of Page

Chain and Cord

Standard on all vertical head rails. Pull the chain to rotate the louvers, or pull the cord to traverse or open and close the vertical. An optional wand control is available.


Chain and Cord

Standard on all vertical head rails. Pull the chain to rotate the louvers, or pull the cord to traverse or open and close the vertical. An optional wand control is available.


Chain and Cord

Standard on all vertical head rails. Pull the chain to rotate the louvers, or pull the cord to traverse or open and close the vertical. An optional wand control is available.


Wand

A slender wand replaces cords and chains for a clean look and greater child and pet safety. Twist it to rotate the louvers, or pull it across the vertical to open and close it.


Wand

A slender wand replaces cords and chains for a clean look and greater child and pet safety. Twist it to rotate the louvers, or pull it across the vertical to open and close it.


Wand

A slender wand replaces cords and chains for a clean look and greater child and pet safety. Twist it to rotate the louvers, or pull it across the vertical to open and close it.


Draw or Stack

Top of Page

Center Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Center stack or stack center means that the louvers or vanes will "stack" in the center of the window or door when in the "opened" position. Other vertical stack options available include left, right, split offset, and opposite.


Center Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Center stack or stack center means that the louvers or vanes will "stack" in the center of the window or door when in the "opened" position. Other vertical stack options available include left, right, split offset, and opposite.


Center Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Center stack or stack center means that the louvers or vanes will "stack" in the center of the window or door when in the "opened" position. Other vertical stack options available include left, right, split offset, and opposite.


Offset Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Offset stack means that the louvers or vanes "stack" is customized. The louvers or vanes stack on each side of the window but the numbers of louvers on each side are not equal. The number of louvers must be specified at the time of order. Other vertical stack options available include left, right, split, center, and opposite.


Offset Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Offset stack means that the louvers or vanes "stack" is customized. The louvers or vanes stack on each side of the window but the numbers of louvers on each side are not equal. The number of louvers must be specified at the time of order. Other vertical stack options available include left, right, split, center, and opposite.


Offset Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Offset stack means that the louvers or vanes "stack" is customized. The louvers or vanes stack on each side of the window but the numbers of louvers on each side are not equal. The number of louvers must be specified at the time of order. Other vertical stack options available include left, right, split, center, and opposite.


Split Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Split stack or stack split means that the half of the louvers or vanes will "stack" half on the right and half on the left side of the window or door when fully opened. Other vertical stack options available include left, right, center, offset, and opposite.


Split Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Split stack or stack split means that the half of the louvers or vanes will "stack" half on the right and half on the left side of the window or door when fully opened. Other vertical stack options available include left, right, center, offset, and opposite.


Split Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Split stack or stack split means that the half of the louvers or vanes will "stack" half on the right and half on the left side of the window or door when fully opened. Other vertical stack options available include left, right, center, offset, and opposite.


Stack Left or Left Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Left stack or stack left means that the louvers or vanes will "stack" on the left side of the window or door when fully opened. Other vertical stack options available include right, split, center, offset, and opposite.


Stack Left or Left Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Left stack or stack left means that the louvers or vanes will "stack" on the left side of the window or door when fully opened. Other vertical stack options available include right, split, center, offset, and opposite.


Stack Left or Left Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Left stack or stack left means that the louvers or vanes will "stack" on the left side of the window or door when fully opened. Other vertical stack options available include right, split, center, offset, and opposite.


Stack Right or Right Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Right stack or stack right means that the louvers or vanes will "stack" on the right side of the window or door when fully opened. Other vertical stack options available include left, split, center, offset, and opposite.


Stack Right or Right Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Right stack or stack right means that the louvers or vanes will "stack" on the right side of the window or door when fully opened. Other vertical stack options available include left, split, center, offset, and opposite.


Stack Right or Right Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Right stack or stack right means that the louvers or vanes will "stack" on the right side of the window or door when fully opened. Other vertical stack options available include left, split, center, offset, and opposite.


Headrail

Top of Page

L-60

The extruded aluminum head rail wears a baked on off-white finish and is available in one-way, split, center, opposite and offset stacks. Cord & chain are standard but our Wand Control is available without any size limitations. Carriers are self aligning and self lubricating for trouble free operation. Low friction wheeled carriers allow louvers to traverse smoothly and a 4 prong pinion rod provides superior louver closure. Fully enclosed drive and flush end caps provide a secure fit and clean finished appearance. The nearly invisible clear nylon carrier stems are centrally making the head rail reversible for left or right stack installations.


L-60

The extruded aluminum head rail wears a baked on off-white finish and is available in one-way, split, center, opposite and offset stacks. Cord & chain are standard but our Wand Control is available without any size limitations. Carriers are self aligning and self lubricating for trouble free operation. Low friction wheeled carriers allow louvers to traverse smoothly and a 4 prong pinion rod provides superior louver closure. Fully enclosed drive and flush end caps provide a secure fit and clean finished appearance. The nearly invisible clear nylon carrier stems are centrally making the head rail reversible for left or right stack installations.


S-95

The anodized head rail is available in one-way, split, center, opposite and offset stacks. Cord & chain are standard but our Wand Control is available without any size limitations. For trouble free operation carriers are self lubricating. Low friction wheeled carriers allow louvers to traverse smoothly and offer a small stack to maximize view. Fully enclosed drive and flush end caps provide a secure fit and clean finished appearance. The nearly invisible clear nylon carrier stems are centrally making the head rail reversible for left or right stack installations. Features a unique stack release button which allows for stack relocation for easy window cleaning.


S-95

The anodized head rail is available in one-way, split, center, opposite and offset stacks. Cord & chain are standard but our Wand Control is available without any size limitations. For trouble free operation carriers are self lubricating. Low friction wheeled carriers allow louvers to traverse smoothly and offer a small stack to maximize view. Fully enclosed drive and flush end caps provide a secure fit and clean finished appearance. The nearly invisible clear nylon carrier stems are centrally making the head rail reversible for left or right stack installations. Features a unique stack release button which allows for stack relocation for easy window cleaning.


S-95

The anodized head rail is available in one-way, split, center, opposite and offset stacks. Cord & chain are standard but our Wand Control is available without any size limitations. For trouble free operation carriers are self lubricating. Low friction wheeled carriers allow louvers to traverse smoothly and offer a small stack to maximize view. Fully enclosed drive and flush end caps provide a secure fit and clean finished appearance. The nearly invisible clear nylon carrier stems are centrally making the head rail reversible for left or right stack installations. Features a unique stack release button which allows for stack relocation for easy window cleaning.


Installation

Top of Page

Inside Mount

Inside Mounts are mounted within the window frame. On inside mounts deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.


Installation Type

Inside or Outside Mount refers to whether the product will be mounted within the window frame (inside mount) or on the wall, window trim or molding surrounding the window (outside mount).

On inside mounts, deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.

On outside mounts you will want to overlap or extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Installation Type

Inside or Outside Mount refers to whether the product will be mounted within the window frame (inside mount) or on the wall, window trim or molding surrounding the window (outside mount).

On inside mounts, deductions are taken from the width measurement to allow the product to fit inside the window frame and provide adequate operating clearance. Minimum depth requirements vary depending on product.

On outside mounts you will want to overlap or extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Outside Mount

Outside Mounts are mounted on the wall, window trim or molding surrounding the window. On outside mounts you will want to extend the window covering beyond the window opening. You will need to determine how much overlap you want and add that amount to the window opening width and / or height measurements.


Louvers

Top of Page

Free Hang PVC Louvers with bottom chain

Free hanging PVC louvers or vanes can be punched to accommodate a bottom chain for an upgrade. Free hang PVC louvers or vanes are typically ordered and manufactured without weights or chains.


Free Hang PVC Louvers with bottom chain

Free hanging PVC louvers or vanes can be punched to accommodate a bottom chain for an upgrade. Free hang PVC louvers or vanes are typically ordered and manufactured without weights or chains.


Free Hang PVC Louvers with bottom chain

Free hanging PVC louvers or vanes can be punched to accommodate a bottom chain for an upgrade. Free hang PVC louvers or vanes are typically ordered and manufactured without weights or chains.


Free Hang PVC Louvers without bottom chains

Free hanging PVC louvers or vanes are typically ordered and manufactured without weights or chains. Louvers can be punched to accommodate a bottom chain for an up charge.


Free Hang PVC Louvers without bottom chains

Free hanging PVC louvers or vanes are typically ordered and manufactured without weights or chains. Louvers can be punched to accommodate a bottom chain for an up charge.


Free Hang PVC Louvers without bottom chains

Free hanging PVC louvers or vanes are typically ordered and manufactured without weights or chains. Louvers can be punched to accommodate a bottom chain for an up charge.


Specialty

Top of Page

Butted Blinds

Vertical blinds may be ordered to butt together when dimensions exceed maximum recommended widths. The idle end spacers are removed so there will be proper louver overlap where the head rails meet.


Butted Blinds

Vertical blinds may be ordered to butt together when dimensions exceed maximum recommended widths. The idle end spacers are removed so there will be proper louver overlap where the head rails meet.


Butted Blinds

Vertical blinds may be ordered to butt together when dimensions exceed maximum recommended widths. The idle end spacers are removed so there will be proper louver overlap where the head rails meet.


Corner Windows

Order as two separate blinds. Measure normally for both verticals. Take no deductions on the pass blind, and 2 3/4" deducting on the butt blind. A greater allowance on the butt blind may be necessary if your projection is not standard. Order finished sizes after you have made proper deductions.


Corner Windows

Order as two separate blinds. Measure normally for both verticals. Take no deductions on the pass blind, and 2 3/4" deducting on the butt blind. A greater allowance on the butt blind may be necessary if your projection is not standard. Order finished sizes after you have made proper deductions.


Corner Windows

Order as two separate blinds. Measure normally for both verticals. Take no deductions on the pass blind, and 2 3/4" deducting on the butt blind. A greater allowance on the butt blind may be necessary if your projection is not standard. Order finished sizes after you have made proper deductions.


Opposite or Reverse Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Opposite stack means that the louvers or vanes will "stack" on the side opposite the cord and chain. Other vertical stack options available include left, right, split, center, and offset.


Opposite or Reverse Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Opposite stack means that the louvers or vanes will "stack" on the side opposite the cord and chain. Other vertical stack options available include left, right, split, center, and offset.


Opposite or Reverse Stack

Stack refers to the area in which the blind or shade "stacks" when opened. Opposite stack means that the louvers or vanes will "stack" on the side opposite the cord and chain. Other vertical stack options available include left, right, split, center, and offset.


Vertical Angle Top

Angle verticals may be ordered for an angled windows. The steepest slope possible is 55 degrees. The blind must be a reverse stack and stack to the high side of the window. Maximum size recommended 144" wide x 122" high. Louvers are ordered at the longest length. Your installer cuts PVC louvers on the job site or marks fabric louvers with hem line and returns them for hemming.


Vertical Angle Top

Angle verticals may be ordered for an angled windows. The steepest slope possible is 55 degrees. The blind must be a reverse stack and stack to the high side of the window. Maximum size recommended 144" wide x 122" high. Louvers are ordered at the longest length. Your installer cuts PVC louvers on the job site or marks fabric louvers with hem line and returns them for hemming.


Vertical Angle Top

Angle verticals may be ordered for an angled windows. The steepest slope possible is 55 degrees. The blind must be a reverse stack and stack to the high side of the window. Maximum size recommended 144" wide x 122" high. Louvers are ordered at the longest length. Your installer cuts PVC louvers on the job site or marks fabric louvers with hem line and returns them for hemming.


Valance

Top of Page

Orlando

Available on horizontal wood and faux wood blinds.


Returns

Custom returns sizes can be ordered at no charge. Valance returns are the side of a window treatment valance that turns back toward the wall or mount location. The distance between the front of the window treatment surface and the wall or mounting surface.


Returns

Custom returns sizes can be ordered at no charge. Valance returns are the side of a window treatment valance that turns back toward the wall or mount location. The distance between the front of the window treatment surface and the wall or mounting surface.


Returns

Custom returns sizes can be ordered at no charge. Valance returns are the side of a window treatment valance that turns back toward the wall or mount location. The distance between the front of the window treatment surface and the wall or mounting surface.


SaVanna III with decorative trim

This valance comes with a decorative trim. You may choose a trim from a variety of colors. This uses a channel panel type louver that matches your louvers.


SaVanna III with decorative trim

This valance comes with a decorative trim. You may choose a trim from a variety of colors. This uses a channel panel type louver that matches your louvers.


SaVanna Standard

The standard valance is a lightweight clear-edged channel system designed to hold a vertical blind louver or your own fabric or wallpaper. Our channel panel's edge is guaranteed not to yellow. Valance is 3 3/4" high. Includes a dust cover.


SaVanna Standard

The standard valance is a lightweight clear-edged channel system designed to hold a vertical blind louver or your own fabric or wallpaper. Our channel panel's edge is guaranteed not to yellow. Valance is 3 3/4" high. Includes a dust cover.


SaVanna Standard

The standard valance is a lightweight clear-edged channel system designed to hold a vertical blind louver or your own fabric or wallpaper. Our channel panel's edge is guaranteed not to yellow. Valance is 3 3/4" high. Includes a dust cover.


SaVanna Standard with Rounded Corner

This valance features the Stay-Clear channel panel with sleek, rounded corners which accommodate vinyl and fabric louvers as inserts. Valance is 3 3/4" high.


SaVanna Standard with Rounded Corner

This valance features the Stay-Clear channel panel with sleek, rounded corners which accommodate vinyl and fabric louvers as inserts. Valance is 3 3/4" high.


SaVanna Standard with Rounded Corner

This valance features the Stay-Clear channel panel with sleek, rounded corners which accommodate vinyl and fabric louvers as inserts. Valance is 3 3/4" high.


Return to Product Detail


Home | About Skandia | Where to Buy | Dealer Info | FAQs | Warranty | Careers | Contact Us
Our Products >> Horizontal Blinds | Vertical Blinds | Shades | Shutters | Motorization | Arches and Cornices | Drapery Hardware
© 2016 Skandia Window Fashions. All rights reserved. Review our terms of use and our privacy policy.